Approved wire section up to 1,5 mm² (14 AWG) 
* Image for illustrative purpose only CIF120V6 - Plug
Number of poles: 12, Clamp tightening, 16A, 2.5mm², 12AWG, 1000V, Pitch 10,16 mm, Flanges, Wiring mode Straight, Green (RAL 6032), Soldering technology Not applicable, UL, VDE, IMQ, CSA
Number of poles: 12
Number of levels: 1
Sides configuration: Flanges
Pitch: 10,16 mm
Voltage: 1000 V
Current : 16 A
Wire section: 0.05 ÷ 2.5 mm² / 30 ÷ 12 AWG
Available approvals: UL, VDE, IMQ, CSA
LOWApproved wire section up to 1,5 mm² (14 AWG)
Approved wire section up to 1,5 mm² (14 AWG)
MEDIUMApproved wire section up to 2,5 mm² (12 AWG)
Approved wire section up to 2,5 mm² (12 AWG)
HIGH
Approved wire section up to 35 mm² (1 AWG)
Approved wire section up to 35 mm² (1 AWG)
PDF
DOWNLOAD PDF
- General data
- Certifications
- Materials
- Download
General data
Features
Screw dimension
M3
Recommended tightening torque
0.5 Nm
Stripping length
7.5 mm
Operating temperature range
-40°C ÷ 105°C
Contact resistance
<15 mOhm
Insulation resistance
>1 GOhm
Certifications
IMQ (n.EM672)
Rated voltage
1000 V
Nominal current
12 A
Wire section
2.5 mm²
Insulating category
I
Overvoltage category/Pollution degree
III/3
III/2
II/2
Impulse voltage
8kV
8kV
8kV
Rated voltage
630V
1000V
1000V
Insulation voltage
630V
1000V
1000V
CSA (n.LR 102896)
Rated voltage
600 V
Nominal current
15 A
Wire section
12 AWG
UL (n.E167473)
Usage Group
B
C
D*
Rated voltage
600 V
300 V
600 V
Nominal current
15 A
Wire section
12 AWG
* These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, or 5A at 301-600V, or the maximum ampere rating, whichever is less.
VDE (n.40027448 Reg.-Nr. 112754)
Rated voltage
750 V
Nominal current
16 A
Wire section
0
Insulating category
III
Overvoltage category/Pollution degree
III/3
III/2
II/2
Materials
Components
Screw material
Nickel-plated copper alloy
Spring contact
Tin-plated copper alloy
Clamp tightening
Nickel-plated copper alloy
Insulating housing material
PA Polyamide
Insulating material group
I (CTI >= 600V)
Self-extinguishing class UL94
V0
Available colors
green
(similar to RAL 6032)
black
(similar to RAL 9005)
light grey
(similar to RAL 7035)
dark gray
(similar to RAL 7040)
orange
(similar to RAL 2003)
blue
(similar to RAL 5012)
red
(similar to RAL 3017)
another colors
(on demand)
0 items were found with these search filters
Hello Giuli!!!
Drawings
Technical drawing
Derating curve
